• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

Housing?

M

Melissa32483

New member
I'm curious to see what kind of housing everyone has for their snakes. The bug guys and the little guys. From tanks to racks to whatever. Let's get some pics up! :)
 
The first pic is Deuce's first viv I made. The second pic is the display I intend to build in the near future.
 
Last edited:
Whoo! That first one is what I have been wanting to make but don't know how. Any chance you could put a step by step thing up so I can make one also?
 
Nicole,

Unfortunately I didn't keep any record of making it. Pretty much just dreamed it up as I went along. It is basically a poplar frame lined with 1/4" lexan(plexiglass). I used window type latches because they tighten as they close to keep things tight. I counter sunk 1/2" wood screws from the inside to hold the lexan in place and siliconed the joints and sunken screw heads. It has opening doors on front like a lizard habitat and also the top opens. The top is black coated aluminum screen from Lowes framed in from the bottom of lid so no sharp edges are exposed. And my son painted the frame black anywhere wood is exposed.
 
You must log in or register to reply here.
Back
Top