• Hello!

    Either you have not registered on this site yet, or you are registered but have not logged in. In either case, you will not be able to use the full functionality of this site until you have registered, and then logged in after your registration has been approved.

    Registration is FREE, so please register so you can participate instead of remaining a lurker....

    Please be certain that the location field is correctly filled out when you register. All registrations that appear to be bogus will be rejected. Which means that if your location field does NOT match the actual location of your registration IP address, then your registration will be rejected.

    Sorry about the strictness of this requirement, but it is necessary to block spammers and scammers at the door as much as possible.

Shedding/ecdysis

Enheduanna

New member
I noticed the sudden changes in Behavior,color, and body temp one day after feeding. At first I was concerned about her having a serious health problem, but now I realize it's time for my two year old albino to shed her skin. Its now day two and still nothing has happened.
Does anyone notice these changes normally; how long does it usually take, it says here at :bounce: www.drsfostersmith.com 1-several weeks.
Also does humidity have any effect on corn snakes
Should she be warm to the touch, because this is the one thing that seems peculiar....
http://www.drsfostersmith.com/pic/article.cfm?aid=813
 
She definitely should NOT be warm to the touch, this means that she is far too hot. She should feel cool to you. The humidity should be kept around 50-60 (from personal experience) though anything higher won't hurt as long as your substrate is dry. It is normal behavior for her to hide more, and for the colors to change. My snakes usually take about 9 days from the time that their skin darkens before a shed to the time that they shed. So 3 days of "darkened" skin, 3 days of blue, and 3 days of clear.
 
Each animal is different as well. All my snakes take 5 to 7 days from start to finish when they shed.

Do you have digital thermometers in tank? If not I would switch to a UTH (that lamp will bake the humidity out of the air) and put a digital probe thermo in tank with the probe right on the glass above the UTH.
 
Back
Top